PCB Pure Sine Wave Power Inverter Circuit Board

1. Product Introduction

PCB Pure Sine Wave Power Inverter Circuit Board

You know that moment when you are at home tired from work, ready for bed, and suddenly the power goes out? Yes my friends, it is a moment that we don't want to happen, but we know it happens.

The best thing in these moments is to have something that can supply our power outage problem... With this we present a simple circuit, easy to build and very cheap.

I present to you a simple circuit to build, whose purpose is precisely to provide AC power to feed a fan, the lights, and some electronic equipment, with a 12V battery.

2. Product Parameter (Specification)

1. Battery low voltage protection:

When the battery voltage is lower than 10.5V per section, the inverter will turn off the inverter (there is no AC voltage output at this time), and the inverter is in standby mode.

2. Battery overvoltage protection:

When the battery voltage is higher than 14.8V per section, the inverter also turns off the inverter and enters standby mode.

3. The battery starts normally:

When the battery is under low voltage protection, when the solar or wind energy charges the battery to 12.5V per section, the inverter automatically starts to output the AC voltage to supply power to the load. Battery overvoltage protection: When the overvoltage protection is restored to below 14.8V, the inverter will also start automatically.

4. Temperature controlled fan and over temperature protection:

When the inverter is working normally, the fan does not turn. When the temperature is too high, the fan runs automatically. When the temperature drops, the fan stops automatically. When the fan is damaged and the temperature is too high, the inverter will turn off the inverter and enter standby mode.

When the temperature drops, the inverter is automatically started and the AC power is output.

5. Shock and short circuit protection:

The inverter has real-time hardware-by-wave current-limit protection, and software delay (400mS) short-circuit protection plus power frequency isolation transformer, which improves the product's impact resistance and reliability.

3.Product Feature and Applications

600Watt inverter circuit
Inbuilt over voltage, over current, and short circuit protection
Space saving and produce very low noise
Fast transient response
complete inverter circuit

This board has inbuilt over-voltage, over current, and short circuit protection. The board is perfectly designed to provide high output performance. This type of board is used in solar systems, to charge the battery of the vehicles, to drive low-power AC motors, etc. In addition, this board has a buzzer beeper for alarming purposes.

4.Product Qualification

We gain more and more recognition from users by high quality. meanwhile our products have passed several testing Certifications and have relevant certifications.

5.Service

Factory direct sales Support OEM/ODM

Our company have research and development center for new product,management department for strict quality control.we continuously launch new products which occupying the international and domestic markets.we deeply favored by customers because of the satisfied products and service.Our products are exported to Southeast Asia,Europe,North America,Australia,and countries from Middle East and other regions and gain a high reputation in international market.

For more information,Welcome to the field trip.